i need a DnT guidance ):
-
I got one idea but I 100% your teacher or nobody will ever attempt in this lifetime... U read it here first and no where else... here goes...
Build a large conveyer belt (similiar to the ones u see at Changi Airport) at Singapore's expressway. The purpose is to let all types of vehicles to travel at the same speed thus reducing traffic jams due to slower moving vehicles in front. By going at the same speed for every vehicles, the time taken to reach another destination will be faster compared to the current one. When they about to reach their destination, they can just restart their engines, signal, and move out of the conveyer belt.
This idea also deals with "tidiness" on the roads (if u think traffic jams are like a messy table or a messy kitchen)
How's my idea? Not possible right. LOL.
But like I said, U seen it here first.
-
LOL .. wtf . u might as well apply it on orchard road -.-!
Mmm shelves is a good idea lea .. but i already do my design specification etc le .
u all wan see wat i write ma ? i can type out . then u all give the final conclusion . haiz
MMmmmmmm Barney ! the paper written there maintain order . is either my english bad for using disorder or wat ba >.<! psps !
-
Originally posted by klivee:
this year .. topic is tidiness/order for O level
i cant sketch well T_T . any help ?
my product is anti-tilt/movement chair .
( cut short ) . prevent tilting so that no1 will fall and causing disorder around the school
prevent movement by causing too much noise it causes disorder .
it will send signal whenever some1 try to tilt or movement .
issit good ? haiz
Are u still sticking on this idea? If yes, just do a model chair size of kiddo chair. put sensor touching the ground on all four legs and also at the buttock =).
When the buttock sensor detected an ass, it will switch on the four sensor on the chair leg. When any sensor loss touch with earth, it will beep loudly. Hence, informing the teacher that someone is not sitting still.
When the buttock sensor detect nothing, it will off all other sensor and allow the chair to be carried into other location without beeping.
I think A1 liao! haha...
-
lame ):
-
last time my sec school years back got 1 guy... only in May then he starts his design n technical drawings. last in the class to start doing the artefact, yet the 1st to finish the fastest. the rest of the class doing slowly doing. o level came, he took, and then result... A1 for d&t, artefact within top 5 of the d&t batch, on display at school gallery.
-
Awww thanks for the motivation ! . but if really need change ... can any1 give me suggesion !? . i dont wan choose wrong thing anymore lols
i treat the chair as the design process in my design journal .
-
ask the one doing ur household chores...
-
hey.. i dont know how your tilt chair is related to tidiness... care to elavorate more? and seems your idea needs a lot of electronic stufff
-
well the design needs of this chair for 105090
some student like to tilt their chairs forward or backward when they are seated some even move their chairs to create unnecessary noise to disturb the order of the learning process. teachers sometimes resort to * offensive * way to address the problem . a device attached to the chair which can detect tilt and movement is good and * unoffensive * neutral body to address the problem .
design brief .
design and make a device that can be attached to a chair that can be used to detect tilting of the chair it can discourage people to tilt and drag their chair
well redano .. whole family dont do housework .1 month 1 time lols
-
Originally posted by klivee:
well the design needs of this chair for 105090
some student like to tilt their chairs forward or backward when they are seated some even move their chairs to create unnecessary noise to disturb the order of the learning process. teachers sometimes resort to * offensive * way to address the problem . a device attached to the chair which can detect tilt and movement is good and * unoffensive * neutral body to address the problem .
design brief .
design and make a device that can be attached to a chair that can be used to detect tilting of the chair it can discourage people to tilt and drag their chair
well redano .. whole family dont do housework .1 month 1 time lols
actually u can bluff bluff...
just modify something already on the market can liao...
take a walk in ur hdb hardware shops...
u say ur house use manual broom n dust pan, then u modify a broom with a self collect dust pan device in it (roller type) as u sweep the floor... -
actly ur idea is can luhs .!
but . how to design the device lea .. u mayb can give some brief idea ? :P . ur idea quite works . i nve thought of broom lea ! Haha
-
Originally posted by klivee:
actly ur idea is can luhs .!
but . how to design the device lea .. u mayb can give some brief idea ? :P . ur idea quite works . i nve thought of broom lea ! Haha
go ask ur teacher lor...
using 2 roller wheels, u move the broom forward, the left 1 turns clockwise, the right 1 turns anticlockwise, with a dust tray in the middle, thus a self-collecting DIY vaccum...go the hdb hardware shops see see, sure got 1...
if not, go to those Self-Fix chain of shop outlets... -
lols i try go see by this week ! got ct ah ! .
what should i ask the boss wat i wan to see o.O !?
-
those brooms lah...
anyway, u must ask ur teacher 1st... wait another person in ur school got the same idea...
if u go make it, the device i think use arcylic can liao... with thermal forming... then the handle use woodwork with craving... n then the supporting stick use metal... e.g. aluminium, cos light weight...
just make use of all 3 materials commonly found in d&t... plastic, wood, metal... -
wont de la .. i know my fren doing wat product etc ! .
broom nobody do lea ! . go selffix diy the shop right ~?
those broom means wat ? LOL . how to askkkkk leh
-
use ur brain n ask lah...
give u some idea already... -
wtf . i using right ..
ask may i see broom ? -.- weird .
-
Originally posted by jgho83:
I got one idea but I 100% your teacher or nobody will ever attempt in this lifetime... U read it here first and no where else... here goes...
Build a large conveyer belt (similiar to the ones u see at Changi Airport) at Singapore's expressway. The purpose is to let all types of vehicles to travel at the same speed thus reducing traffic jams due to slower moving vehicles in front. By going at the same speed for every vehicles, the time taken to reach another destination will be faster compared to the current one. When they about to reach their destination, they can just restart their engines, signal, and move out of the conveyer belt.
This idea also deals with "tidiness" on the roads (if u think traffic jams are like a messy table or a messy kitchen)
How's my idea? Not possible right. LOL.
But like I said, U seen it here first.
This is interesting.
. Nice. -
Originally posted by klivee:
wtf . i using right ..
ask may i see broom ? -.- weird .
Wtf. U might as well ask him to go do for u.Go and find out urself la.
Knn. So lazy. Want to knw, no initiative, expect people to do everything for u har?
-
u huan lo simi ?
-
knn nb... u asking for help... n suan pple trying to help u...
-
i asking for help . yeah . but does he need to scold me o.O? . step pai ah ;o ?
-
LOL , like that also can quarrel -_-